Heater Maintenance in Richland Hills, Fort Worth, TX and Surrounding Areas
Heaters are one of the appliances that you use on a daily basis. Ensuring that it is always functioning at its best will improve your life, as you will always have a constant supply of hot water for various purposes such as washing clothes.
Here are four heater maintenance tips that you can employ to increase its efficiency and durability.
Lower the Temperature Setting
The default temperature setting in most water heaters exceed 130 degrees Fahrenheit. Rarely will you need to heat the water to that temperature. Professional plumbers recommend reducing the setting to 115-120 degrees to minimize the risk of the heater overheating and conserve energy.
Check the Pressure Relief Valve and Temperature
The pressure relief valve is a safety feature in your water heater. If the heater was to heat the water continuously even after reaching the pre-set temperature, it could result in an explosion due to the buildup of pressure. The valve helps to release the excess pressure thereby keeping the water heater working safely.
If the valve is in a good condition, it will snap back into place when you lift it. You will also hear a gurgling noise as the valve allows some water to flow to the drain.
Wrap it in an Insulating Blanket
Wrapping the heater in an insulating blanket will reduce energy consumption by preventing heat loss. Make sure that the blanket also covers any exposed pipes to get maximum energy usage reduction. This simple maintenance will also increase the durability of the heater.
Annual Professional Inspection/Tune-up
Just like your car, the water heater needs to be regularly checked by certified and trained personnel. The diagnostic tests done will uncover any hidden mechanical flaws and determine if the heater is running efficiently.
The above heater maintenance tips will enhance the functionalism of the appliance significantly. Set aside time and money for them to deliver maximum utility from the heater.